TARRANG Acrylic Wallputty

Ideal Paints TARRANG Acrylic Wall Putty is a water Base Putty. It is one of the best products of it’s kind available in the market, provides a very strong, durable foundation and brings out the best performance from the finish paints, both in looks and in durability.

Features & Benefits

Ideal Paints TARRANG Acrylic Wall Putty is a water Base, ready-to-use putty meant for filling and smoothenening out cracks and dent on the plastered wall or similar interior surface. The putty has special acrylic binder that insure that it retains a strong grip on the wall surface, thereby increasing the life of thw paint film.on account of the putty’s exceptional and smoothness, emulsion painted over the putty will tend to look richers. its fast drying properly facilitates quicker completion of jobs.

 

  • Recommended Usage & Application
  • Technical Data
  • Precautions
  • Download PDF
Ideal Paints TARRANG Acrylic Wall Putty can be used for priming plastered wall, asbestos, brick work, concrete, etc.

Cleaning: surface should be free from any loose paint, dust or grease.Growths of fungus, algae or moss should be removed by wire brushing and water.
Filling for Cracks: for filling cracks upto 3mm use crack seal.
Filling for Holes and Dents: in case of dents and holes use Ideal Paints TARRANG Acrylic Wall Putty or white cement and fine sand in the ratio 1:3.
Sanding : Sand the Surface with emery paper 180 and wipe clean. 
Topcoat : Thin 1 kg of Ideal Paints TARRANG Acrylic Wall Putty with if required of water. Apply 2 coats of Putty with an interval of 4-6 hours.

Coverage* : on normal masonry surface by brushing: 1 coat: 4-5 sq mtr/kg 2 coat: 2-3 sq mtr/kg
Drying Time : surface dry time ~ 30 minutes
Sheen Levels : Matt
Flash Point
(IS 01/1987, Part 1, sec 6)
: NA
Stability of thinned paint : Use within 24 hrs.
Shelf-life : 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.

*Actual coverage may very from quoted coverage due to factors such as method and condition of application and surface roughness.


Safety Features
Non-flammable

Packing Sizes

1 kg, 2kg, 5 kg, 10 kg, 20 kg

  • Do not apply when ambient temperature is less than 10 C or if the temperature might drop to this level within 4 hrs of application.
  • Do not over thin or overextend the brush.
  • Avoid eye and skin contact. In case if eye and skin contact, wash with plenty of clean water.
  • In high-humidity areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc before application of the paint system.
  • stir well and strain before use.
No downloads Available...