Ideal Paints TARRANG Acrylic Distemper can be applied on all types of plasters, false ceilings, asbestos sheets, concrete etc. it is designed for interiors.

Cleaning: Ensure that the surface to be painted is free from any loose paint, dust or grease.
Primer: Apply a coat of Ideal Paints REAL Cement Primer. Allow drying 4-6 hours.
Putty: Smoothen the surface by filling dent with thin coat of wall putty allow drying 4-6 hours. Sand with emery paper 320 and wipe clean. 
Topcoat: Thin 1 kg of Ideal Paints TARRANG Acrylic Distemper with 500-700 ml of water. Apply 2-3 coats of paint with an interval of 4-6 hours.

Coverage*	:	on smooth primed masonry surface by brushing: 1 coat: 18-24 sq mtr/kg 2 coat: 9-12 sq mtr/kg
Drying Time	:	surface dry time ~ 15-20 minutes
Sheen Levels	:	5-10 at 60 deg GH
Finish	:	Soft Sheen & Smooth
Washability	:	High
Flash Point (IS 01/1987, Part 1, sec 6)	:	NA
Stability of thinned paint	:	Use within 24 hrs.
Shelf-life	:	3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.

*Actual coverage may very from quoted coverage due to factors such as method and condition of application and surface roughness.

Safety Features :
Non-flammable

Packing Sizes :
1 kg, 2kg, 5 kg, 10 kg, 20 kg

• Do not apply when ambient temperature is less than 10 C or if the temperature might drop to this level within 4 hrs of application.
• Do not over thin or overextend the brush.
• Avoid eye and skin contact. In case if eye and skin contact, wash with plenty of clean water.
• In high-humidity areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc before application of the paint system.
• stir well and strain before use.

No downloads Available...